6
English
y Do not face the projector lens to the sun. It can lead to re.
y When switching the projector o, suggest to ensure the projector completes its
cooling cycle before disconnecting power.
y Do not frequently turn o the main power abruptly or unplug the projector during
operation. The best way is to wait for the fan to turn o before turning main power o.
y Do not touch air outlet grille and bottom plate which becomes hot.
y Clean the air lter frequently if have. The temperatue inside may rise and cause
damage when the lter/ventilation slots clogged with dirt or dust.
y Do not look into the air outlet grille when projector is operating. It may hurt your eyes.
y Always open the lens shutter or remove the lens cap when the projector is on.
y Do not block the projector lens with any object when the projector is under operation
as this could cause the object to become heated and deformed or even cause a re.
y Do not attempt to disassemble this projector. There are dangerous high voltages
inside which may hurt you. Refer servicing only to suitable qualied professional
service personnel.
y Do not stand the projector on end vertically. It may cause the projector to fall over,
causing injury or damage.
y 360° projection capability
Images can be projected over a full 360° range along the vertical axis, including
reproduction on a ceiling or oor.
360º
360º
Caution for Listening
To protect your hearing, follow these instructions.
y Increase the volume gradually until you can hear clearly and comfortably.
y Do not increase the volume level after your ears have adjusted.
y Do not listen to music at high volumes for extended periods.
y Do not increase the volume to block out noisy surroundings.
y Decrease the volume if you can’t hear people speaking near you.
To Next Page
Loading...
