AT2000R Tracer Module
User Manual
DESCRIPTION
AT2000R is a tracer module and can be used with silencer. As long as silencer’s internal space is
able to accommodate the AT2000R module, the AT2000R module can be installed into silencer,
which makes silencer become a tracer unit.
AT2000R module is equipped with infrared sensors at its both ends, which can detect airsoft pellets.
User can install AT2000R module into the silencer in any direction according to user’s preference
and the appearance of silencer.
Before installing, the inner sponge and spring must be removed from the silencer.
If the diameter of silencer’s inner aperture is longer than of AT2000R module’s,
please insert O-rings or round bushings inside the silencer to hold the AT2000R modules
to be coaxial with the silencer.
If AT2000R modules is not coaxial with the silencer, airsoft pellets may mishit the internal tube of
the AT2000R module and damage the internal components and structures.
To Next Page
Need help?
General