EasyManua.ls Logo

ACIS jet vag JUNIOR - User Manual

ACIS jet vag JUNIOR
64 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
JUNIOR / JUNIOR PRO - ALVÉO’NOX - NEW JET VAG - PRO LUXE - LUM JET VAG
NAGE À CONTRE-COURANT
COUNTERCURRENT SWIMMING SYSTEM  GEGENSTROMANLAGEN 
NATACIÓN A CONTRACORRIENTE  NUOTO CONTROCORRENTE 
TEGEN DE STROOM IN ZWEMMEN NATAÇÃO EM CONTRACORRENTE
NEW JET VAG
LUM JET VAG
ALVÉO’NOX
PRO LUXE
JUNIOR JUNIOR PRO
FR
ENG
DE ES IT NL PT
FR
ENG
DE
ES
IT
NL
PT
p.2
p.11
p.20
p.29
p.38
p.47
p.56
NOTICE D’INSTALLATION
INSTALLATION MANUAL  INSTALLATIONSANLEITUNG
MANUAL DE INSTALACIÓN  ISTRUZIONI PER L’INSTALLAZIONE
MONTAGEHANDLEIDING  INSTRUÇÕES DE INSTALAÇÃO
NOT210121_1_NCC
Question and Answer IconNeed help?

Do you have a question about the ACIS jet vag JUNIOR and is the answer not in the manual?

Summary

1. Kit Components

Front Panel Types

Details different front panel designs for JUNIOR/JUNIOR PRO, ALVÉO'NOX, NEW JET VAG, PRO LUXE, LUM JET VAG models.

Common Components Overview

Describes shared components like sealing parts applicable across various jet system models.

Pump Model Identification

Illustrates the MGD and CCS pump models integrated into the counter-current swimming systems.

Heat-Retractable Kit Inclusion

Indicates whether a heat-retractable kit is provided for specific counter-current system models.

Control System Options

Presents pneumatic and piezo control systems, including remote control functionalities.

Included Accessory Identification

Lists essential accessories such as needles and drill bits that accompany specific jet models.

2. Mounting the Facade

Sealing Part and Output Management

Install the sealing part, identify outputs, and manage air/control tubes.

Electrical Control Wiring

Route control cables and use heat-shrinkable sheath for electrical connections.

Front Panel Assembly

Fit the front panel onto the sealed part and secure with M5 screws.

3. Pump Location Choice

Pump Placement Near Pool

Option to place the pump near the pool in a technical room, with associated risks.

Pump Placement in Above-Ground Room

Advises placing the suction pipe below water level for above-ground technical rooms.

Pump Priming Procedure (Stitching)

Details the setup and priming procedure for the pump using stitching and filtration.

4. Connecting the Pump

Optimal Pump Positioning and Piping

Ideal positioning is near the pool and under water level, keeping piping in Ø63mm.

Pump Self-Priming Limitations

Pump is not self-priming but easy to start up to 0.5m above water level.

Pipe Diameter Selection Guide

Guide for pipe diameter based on length, with options for doubling suction hose.

5. Electric Connections

Requirement for Qualified Technician

Emphasizes that electric connections must be done by a qualified technician.

Voltage Verification

Check that the voltage corresponds to the equipment supplied.

Switch Box Placement Guidelines

Place switch box no further than 20m from pneumatic push-button.

Piezo Control Distance Exemption

With Piezo electric control, there is no maximum distance for the switch box.

6. Operation

Remote Control Operation

Control current swimming system and light facade remotely using buttons A and B.

Flow Rate Adjustment

Setting water and air flow rates on the front panel or notched wheel.

7. Accessories

Stainless Steel Handle Accessory

Description of the stainless steel handle accessory.

Massage Hose Accessory

Description of the massage hose accessory.

Water Jet Accessory

Description of the water jet accessory.

ACIS jet vag JUNIOR Specifications

General IconGeneral
BrandACIS
Modeljet vag JUNIOR
CategoryLighting Equipment
LanguageEnglish

Related product manuals