Acme Furniture 97362 User Manual





ASSEMBLY INSTRUCTION FOR ACME FURNITURE
MODEL#97362/97364
Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.
Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.
For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
***Do not fully tighten screws until fully assembled.***


Acme Furniture 97362 Specifications

General

Brand	Acme Furniture
Model	97362
Category	Indoor Furnishing
Language	English

Summary

Acme Furniture 5-Drawer Chest Assembly Guide

Product Overview and Specifications

Details the ACME 5-Drawer Chest, including model number and physical dimensions for user reference.

Parts List Identification

Comprehensive list of all furniture components (A-N) required for assembly, with quantities.

Hardware List Identification

Detailed list of all hardware items (1-21) including screws, bolts, and tools needed for assembly.

Comprehensive Assembly Instructions

Step 1: Initial Frame and Runner Setup

Attaches side panels (B, C) and slide rails (6) to the main structure using specified hardware.

Step 2: Base and Support Integration

Connects the bottom panel (D) and support pieces (K) to the main frame components.

Step 3: Main Body Assembly

Joins the top panel (A), back panel (M), and side panels (B, C) to form the main chest body.

Step 4: Drawer Front and Side Preparation

Prepares drawer front panels (E, F, G) and side panels (H, I) for drawer box assembly.

Step 5: Drawer Box Construction

Assembles the drawer boxes by connecting prepared front, side, and support pieces (E-L).

Step 6: Drawer Back and Bottom Attachment

Secures the drawer back panels (J) and drawer bottom panels (N) to the assembled drawer boxes.

Step 7: Drawer Insertion and Slide Alignment

Installs the assembled drawers into the chest unit and aligns outer slides with drawer slides.

Step 8: Wall Anchoring and Final Checks

Secures the unit to the wall for safety and performs final checks for stability and tightness.