ACME 21610Q-11 User Manual

Queen
Storage
Bed
DESCRIPTION:
Queen Headboard
Queen Footboard
Queen Side Rails
Queen Slat & Support Legs
Storage Drawer
INSTALLATION AREA
+
Caution : Please read instructions thoroughly before unpacking assembly parts.
Sharp, exposed staple tips can cause injury, therefore, for your protection,
please remove any exposed staples used in packing.
1. We recommend that you should assemble this product with the assistance of another person ;
this will make assembly easier, and will help to eliminate damage to the product or injury to
persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside
the carton during shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non - abrasive floor before assembly. and follow the assembly step to
assemble your newly purchased product correctly and efficiently .
Drawer N Q & N R are identical & compatible, to each other regardless left or right.
During assembly, do not tighten any hardware until the complete unit has beeb assembled.
2 PERSON
installation recommended
20 - 25
mins
20 - 25
minutes for installation
PAGE 1 OF 11
A
C
B
Assembly
Installation
Guide
+
=
!
N :R
N :R
N :Q

ACME 21610Q-11 Specifications

General

Brand	ACME
Model	21610Q-11
Category	Indoor Furnishing
Language	English

Summary

Queen Storage Bed Assembly Guide

Installation Area and Safety Precautions

Details the required installation space and provides essential safety and assembly tips before starting.

Headboard Assembly Steps

Attach Headboard Legs and Support Panels

Connects the headboard legs (C) and triangle support panels (D) using bolts and screws.

Attach Headboard Back Supports

Secures the back support pieces (L & O) to the headboard frame using screws.

Footboard Structure Assembly Steps

Connect Side Rails to Frame

Attaches the side rails (H) to the headboard legs (C) and footboard (B) using bolts.

Install Footboard Drawer Frame and Support Legs

Attaches support legs (G) to the footboard drawer frame (J) and connects the frame to side rails.

Install Drawer Support Rails

Attaches drawer support rails (E) to the footboard (B) and drawer frame (J).

Attach Additional Support Legs and Rails

Attaches support legs (F) to drawer support rails (M) and connects rails (M) to side rails (H).

Install Bed Slats and Z-Brackets

Secures bed slats (I, P) to support (N) and attaches Z-brackets (14) to support (N) and leg (F).

Drawer and Concealed Panel Assembly Steps

Insert Drawers and Attach Handles

Slides drawers (Q, R) into place and attaches handles (16) with screws (17, 18).

Secure Concealed Panel

Attaches the concealed panel (K) to the bed slats (I) using screws (9).