Acon Mission Ultra User Manual (English)

Other manuals for Acon Mission Ultra

Questions and Answers:

D
Dawn LewisAug 7, 2025
What to do if I get a Code Chip Error on my Acon Measuring Instruments?
- R
  ramirezclaudiaAug 7, 2025
  If you're getting a Code Chip Error on your Acon Measuring Instruments, first ensure that you are using the correct Mission® Ultra Hemoglobin Code Chip and repeat the test. If the code chip is damaged, replace it with a new one that has the correct code number and try again. If the code chip was removed during the test, make sure the code chip matches the test strip code before repeating the test.
B
Brandon JohnsonAug 11, 2025
What to do if the Acon Measuring Instruments test strip is contaminated?
- A
  Allen ConwayAug 11, 2025
  If you suspect the test strip for your Acon Measuring Instruments is contaminated or has been used previously, repeat the test using a new test strip.
A
ariveraAug 15, 2025
What to do if Acon Measuring Instruments shows insufficient specimen volume?
- R
  Robert DaviesAug 15, 2025
  If you are getting an error related to insufficient specimen volume or a specimen application error on your Acon Measuring Instruments, repeat the test, ensuring that you apply enough specimen to completely fill the test strip check window.
D
Derrick PalmerAug 19, 2025
What to do if Acon Mission Ultra measure result is too high?
- R
  rachel96Aug 19, 2025
  If the measurement result from your Acon Measuring Instruments is too high (greater than 26.0 g/dL, 16.1 mmol/L, or 260 g/L), repeat the test. If the problem persists, it is recommended to consult with your doctor.
B
brewerjefferyAug 23, 2025
How to fix Acon Mission Ultra data transfer error?
- J
  Jonathan CaldwellAug 23, 2025
  If you're experiencing a data transfer error with your Acon Measuring Instruments, first try using a new data transfer line and attempt the transfer again. If the issue persists, please contact your local dealer.
J
jason77Aug 28, 2025
How to resolve a memory error on Acon Mission Ultra?
- T
  Timothy BakerAug 28, 2025
  If your Acon Measuring Instruments is showing a memory error, remove the battery for 90 seconds, then reinsert it and turn the meter back on. If the problem continues, contact your local dealer.

Acon Mission Ultra Specifications

General

Measurement Range	0-26.0 g/dL (0-16.1 mmol/L or 0-260 g/L).
Result Calibration	Plasma-equivalent
Minimum Specimen Size	4 μL
Test Time	<12 seconds
Hemoglobin Units of Measure	Millimoles per liter (mmol/L) or grams per deciliter (g/dL) or grams per liter (g/L)
On/Off Source	Two CR2032 coin cell batteries (3V)
Automatic shutoff	4 minutes after the last action
Battery Life	Minimum of 1, 000 measurements
Memory	500 results with date/time
Display Size	36 mm × 41 mm
Meter Storage Conditions	0-50°C (32-122〬F); 10%~90% RH
Operating Temperature	10°C - 40°C
Operating Relative Humidity	10%~90%
Data Port	Audio Port

Weight and Dimensions

Meter Size	58 mm × 90 mm × 20 mm
Weight	64 g

View in Manual

Related product manuals

Acon Mission

58 pages

Acon Mission Ultra Manual

Other manuals for Acon Mission Ultra

Questions and Answers:

Acon Mission Ultra Specifications

Related product manuals