Acorto 2000s - Page 18

Section
3: User
fnformation
3020-0034
Main Menu Categories
1. Gumulative Total
2. Gumulative Statistics
3.
Daily
Statistics
4. Automatic
Start
5. Check Temps
6. Temperature Settings
7. Goffee
Powder
Dose
8. Coffee Powder Pre
9. Water Volume
10. Milk Timings
11. Miscellaneous
{2.
Test Routines
Displays
the total
number of drinks
poured from
machine.
This
number is reset onlv when a
new
CPU
or
software
is installed
Displays
the
total number of drinks by drink
type
Displays
daily
drink statistics by drink
type. lltatistics
are
reset when
a brew
group/shutdown
clean is mn.
The machine
is
programmed
to automatically siart each
morning.
Machine can be
programmed
to start 7 days
a
week or
Monday
-
Friday. Automatic Start also
contains
the settings
for internal clock.
Displays
water, steam and
refrigerator temperatures
Change
steam,
water
and
refrigerator settings
Change
amount
of coffee
ground
into the brew chamber.
Coffee
is displayed
in
Grams.
Change
coffee
pre-treatment
setting. The Pre-treatment
settings
include the
pre-infusion
of water
into
the cofflee
grounds,
additional
packing
of
coffee
grounds
iand
wait
time before
extraction begins.
Change
water
volume for espresso extraction,
arnericano
and hot
water button.
Change
Milk
Timings
for all
drinks,
milk buttons and
set
Cap
Boost Delay. Display last milk clean. Czrp
Boost
Delay
increases the number of seconds
steamecl milk is
poured
before foamed milk is
poured
when
making
a
cappuccino.
Display
current software version,
load defaults, adjust
auto
rinse time, and reset PM counter.
Used for service
diagnostic
testing, each component of
the
machine can be run independently.
Factory Default
Seftings
The machine is
programmed
with specific
Factory
Default
Settings.
Sub-Menu
Categories have both
minimum and maximum
values,
and an adjustable
interval
value. The following table
displays all factory
default settings, min
and max
values and
adjustable intervals.
The Statistics and
Check Temp
categories
etre
"read
only"
and the value is displayed but
is not
ad.justable.
3-1 0
Acorto
2000rVi Technical
Support