Acoustech H-310C - User Manual

Model H-310C
Ceiling Speaker
Installation and Owner·s Manual
Acoustech

Summary

What You Need To Do The Job

Speaker System Parts Inventory

Check for shipping damage and identify all speaker parts and hardware included in the box.

Tools For Installation

Where To Put Your Speaker(s)

Cutting Holes For Speaker(s)

Locating and Cutting Speaker Holes

Guides on finding ceiling joists and cutting the correct size hole for speaker installation.

Running Connecting Wire(s)

Routing Wire in Attic;Crawl Space

Hooking Up Your Speaker(s)

Connecting Wires at Speaker End

Instructions for stripping and connecting speaker wires to the speaker terminals.

Connecting Wires at Amplifier End

Instructions for stripping and connecting speaker wires to the amplifier or receiver terminals.

Final Assembly

Installing the Speaker Unit

A Short Test Drive

Further Reading

Quick Troubleshooting Guide

Provides common solutions for issues like no sound, intermittent sound, or humming.

Acoustech H-310C Specifications

Audio Specifications

frequency response	24Hz - 23kHz
recommended amplifier power	10-250 watts per channel
sensitivity	90dB
nominal impedance	8 ohms

Speaker Components

woofer	10˝ Woven Fiber
midrange	Pivoting 2[1]/2˝ Woven Fiber
tweeter	Pivoting 1˝ titanium

Installation Requirements

overall dimensions	13[1]/2˝ dia.
required cutout	12[1]/2˝ dia.
required depth	5[1]/4˝