Acoustic 136 - Booster Output

BOOSTER
OUTPUT JACK
(18)
This
jack
would be used if
you
desire to drive an additional
power
amp
and
speakers using
the
lead
to
control the
extra
power
amp.
The
jack
may
also be used as
a
recording
output to
drive
a tape
recorder
or as an
output that will
plug
directly into
a
P.A.
system to
prevent
the
possibility
of
P.A. feedback.
The
booster output will
provide
a signal level
of
230mv
when the
amplifier is
putting
out about 100
watts.
Make
sure that 230mv is sufficient for
the auxiliary
equipment.
NOTE:
Export models
are designed
for
operation at 240 volts at 50/60 cycles.
P/N
410059