To Next PageTo Next PageWhat to do if the heart rate sensor does not work on my ACP Fitness Equipment?
If the heart rate sensor on your ACP Fitness Equipment isn't working, ensure it's properly connected, correctly positioned, and moistened. You may also try repositioning the heart rate sensor.
How to adjust resistance if it's too high for active exercising on ACP Fitness Equipment?
If the resistance is too high during active exercising on your ACP Fitness Equipment: * In Neuro exercise mode, reduce the resistance. * In Ortho or Cardio exercise mode, reduce the power setting. * Increase the crank length.
How to increase power on Omnicycle® Elite ACP Fitness Equipment?
To address too little power on your Omnicycle® Elite ACP Fitness Equipment, you can shorten the crank length or increase the motor power by one increment. Be certain not to overstress joints and tendons.
Critical safety warnings to observe before operating the device.
Safety considerations and best practices for using the Omnicycle Elite.
Instructions for switching the device on, off, and placing it in standby mode.
Connecting power, starting/pausing sessions, and basic operational sequence.
Explanation of exercise modes and using the heart rate monitoring system.
Adjusting resistance, power, and parameters for exercise programs via the touch screen.
Managing spasm detection and using session control buttons like Start/Stop.
Settings for motor power, spasticity detection, speed adaptation, and microphone sensitivity.
A guide to identifying and resolving common machine issues.
Details of warranty coverage, periods, exclusions, and validation requirements.
How to adjust program parameters, set defaults, and reset factory settings.
General| Category | Fitness Equipment |
|---|---|
| Type | Exercise Bike |
| Resistance | Magnetic |
| Power Source | AC Adapter |
| Connectivity | Bluetooth |
| Display | LCD |
| Max User Weight | 150 kg |
| Programs | Multiple preset programs |
| Flywheel Weight | 18 kg |
| Weight | 50 kg |
