Acquaer PCP025 User Manual

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Model:PCP025

OWNER’S MANUAL

Auto On-Off Water Removal

Pool Cover Pump

Model:PCP025

El manual del propietario

Bomba de extracci n de agua para

cubierta de piscina con encendido

y apagado automático

Modelo:PCP025

ó

WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS

before operating. Failure to follow the safety rules and other basic safety precautions may result

in serious personal injury

If you have any QUESTIONS, PROBLEMS, MISSING PARTS, please call our customer service

department at 800-201-1360 before returning to your retailer

Phone:800-201-1360

Email:Acquaer@strategicretailsolutions.com

Web:www.acquaerpumps.com

FOR ENGLISH

.................................................................

Pages 02-06

FOR SPANISH

.................................................................

Pages 08-12

Table of Contents

Questions and Answers:

L
Lori FloresAug 2, 2025
What to do if my Acquaer PCP025 won't start?
- M
  Melissa GomezAug 2, 2025
  If your Acquaer Swimming Pool Pump won't start, there are several potential causes. First, check the fuse; if it's blown, replace it with a fuse of the correct size. Low line voltage could also be the issue; if the voltage is below the recommended minimum, inspect the wiring from the main switch. If the wiring is fine, contact your power company. A defective motor could also be the culprit, in which case you should replace the pump. Also ensure that the water level is at least 2 inches or more.
B
brendakellyAug 17, 2025
Why Acquaer Swimming Pool Pump operates but delivers little water?
- A
  Angela NolanAug 17, 2025
  If your Acquaer Swimming Pool Pump operates but delivers little or no water, the issue could stem from several factors. Low line voltage is a possibility, and you should contact your power company to investigate. There might be something caught in the impeller, so cleaning it out is recommended. The diameter of your garden hose or the length of the discharge line could also be factors; use a larger diameter hose or a 1'' flexible pipe, and minimize excess hose length. Additionally, check if the check valve is installed without a vent hole; if so, drill a 1/16'' - 1/8'' (1.6-3.2mm) diameter hole between the pump discharge and the check valve.

Acquaer PCP025 Specifications

General

Brand	Acquaer
Model	PCP025
Category	Swimming Pool Pump
Language	English

Summary

Technical Specifications

Performance

Safety Information

Preparation and Installation

Automatic Operation

Details on how the pump activates and deactivates based on water levels and sensor probes.

Operation and Troubleshooting

Troubleshooting

Guides users through common problems, their possible causes, and corrective actions.

Parts Information

Parts Diagram

Visual representation of pump components with numbered parts.

Parts List

List of pump components corresponding to numbers in the parts diagram.