Copyright © Acronis, Inc., 2000–2005
79
Working with Acronis Disk Editor
Write to a file
To read a block from a file and insert it into a disk sector, you must place the cursor on
the necessary sector byte and then select Read from file… menu item. The selection of
this menu item will result in opening the Read from file window. In this window, enter the
file name and its path or locate a file by clicking the
Browse… button. To insert file
contents to a sector from the current cursor position (or considering offset in the file),
click the
OK button.
Read from a file
8.6 View
Information in the Acronis Disk Editor window can be viewed and edited in several
different modes. You can select the appropriate view mode with the help of the View
menu.
To Next Page
Loading...