Need help?Do you have a question about the ACS ACR 38 and is the answer not in the manual?
Power| usb power source | From USB |
|---|---|
| supply current | max. 50mA |
| voltage | 5V |
Smart Card Interface| standards | ISO-7816 Class A, B and C (5V, 3V, 1.8V) |
|---|---|
| smart card read/write speed | 1, 743 – 250, 000 bps |
| clk frequency | 4 MHz |
Operating Environment| operating temperature | 0 - 50° C |
|---|---|
| operating humidity | 40% - 80% |
| card insertion cycles | min. 100, 000 |
Weight and Dimensions| dimensions | 73.0mm (L) x 96.5mm (W) x 19.0mm (H) |
|---|---|
| weight | 95g (± 5g allowance for cable) |
| cable length | 1.5 meters |
Specifies the voltage and current for smart card power.
Commands for reader status, card selection, and communication settings.
Commands for interacting with MCU smart cards.
Commands for reading, writing, and managing memory cards.
To Next Page
