ACS USB NFC Reader III - Technical Specifications; Contactless Smart Card Interface; SAM Card Interface; Host Interface

5
Technical Specification
Contactless Smart Card Interface
Supported Card Types
ISO/IEC 18092 NFC, ISO 14443 Type A & B,
MIRFARE, FeliCa
Operating Frequency
13.56 MHz
Reading Distance
Up to 50mm (Depending on tag type)
Read/White Speed
106/212/424 kbps (Programmable)
Anti-Collision
Yes
Supported NFC Mode
NFC Reader/Write, Peer-to-Peer, Card
Emulation
SAM Card Interface
Standard
1 x ISO 7816 Class A (5V) Standard SIM
size slot
Protocol
T=0, T=1
Read/Write Speed
9.6 – 215 kbps
Host Interface
Protocol
USB CCID
Connector Type
USB Type-A, USB Type-C
Speed
USB 2.0 Full Speed (12Mbps)
Supply Voltage
5VDC
Current Consumption
Max. 200mA
USB Firmware
Upgrade
Supported
Physical Characteristics
Dimension (L x W x H)
Main Body: 98 x 65 x 12.8 mm
Antenna size: 50 x 40 mm
Weight
81 g
Available Colour
Matte Black
USB Cable Length
1 m (Non-detachable)
Peripherals
Buzzer
1 x Programmable Buzzer (Mono-tone)
LED
1 x Programmable LED (Red & Green)