What to do if there is a communication error in my Acson Inverter?
If you're experiencing a communication error with your Acson Inverter, here are a few things you can check: * First, examine the connection wires between the indoor and outdoor units. * Second, verify the voltage of the signal terminal. * Third, manually rotate the indoor fan. * Finally, check the power supply waveform.
What to do if Acson Inverter's indoor fan motor is abnormal?
If the indoor fan motor is acting abnormally in your Acson Inverter, you can try: 1. Check the indoor fan by rotating it with your hand. 2. If it doesn't rotate smoothly, replace the indoor fan motor. 3. Check the fan motor voltage. 4. If the voltage isn't at the rated level, replace the indoor PCB. 5. Check the fan capacitor’s conductivity (AC Motor). 6. Replace the fan capacitor if there’s conductivity.
What to do if Acson Inverter shows indoor heat exchanger thermistor short or open?
If the indoor heat exchanger thermistor is shorted or open in your Acson Inverter, you should: 1. Check the connector connection. 2. Check the sensor resistance value.
How to troubleshoot installation error on Acson Inverter?
If you're getting an installation error with your Acson Inverter, make sure to: 1. Check the indoor and outdoor unit model name. 2. Check the part code on the indoor and outdoor PCB.
To Next Page
General