19
Application Information AWM-G-2009
Selection of Location and Space
Indoor Unit
Install the fan coil (indoor) unit at a location with the following requirements
Location is suitable for wiring, piping and drainage.
No obstruction of air fl ow into and out of unit where cooler air can be evenly distributed.(See fi g. 1)·Ensure
that air discharge is not short circuited with air intake.
Ensure that wall is suffi ciently strong, rigid, fl at, perpendicular and vibration free.
Where air fi lter cassette can be slided in or out easily.
Where there is no danger of fl ammable gases.
Where there is no direct sunlight on unit.
Also to take into consideration a place for the installation of the Wireless LCD Remote Controller.
Caution
Do not install unit near the door waybecause excessive fresh air may causepanel condensation on the unit.•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
