Need help?Do you have a question about the Acson G6 and is the answer not in the manual?
Identifies the origin of the transmitted signal.
Confirms signal transmission via blinking indicator.
Adjusts the desired room temperature using TEMP +/- buttons.
Starts or stops the air conditioner unit operation.
Cycles through fan speeds: Low, Med, High, Auto.
Selects the unit's operating mode (AUTO, COOL, DRY, FAN, HEAT).
Activates a delay timer for 1 to 15 hours for unit operation.
Energy-saving feature that automatically adjusts temperature.
Enables automatic air swing or sets a specific louver direction.
Affix the holder to the wall using screws for optimal signal reception.
Instructions for slotting into and pulling the remote from its holder.
Identifies the origin of the transmitted signal.
Confirms signal transmission via blinking indicator.
Adjusts the desired room temperature using TEMP +/- buttons.
Starts or stops the air conditioner unit operation.
Cycles through fan speeds: Low, Med, High, Auto.
Selects the unit's operating mode (AUTO, COOL, DRY, FAN, HEAT).
Activates a delay timer for 1 to 15 hours for unit operation.
Energy-saving feature that automatically adjusts temperature.
Enables automatic air swing or sets a specific louver direction.
Affix the holder to the wall using screws for optimal signal reception.
Instructions for slotting into and pulling the remote from its holder.
General| Brand | Acson |
|---|---|
| Model | G6 |
| Category | Remote Control |
| Language | English |
To Next Page
