Acterna MTSe 5000 Series - File Management (cont.); Printing Stored Traces

8-22
USER MANUAL 750000992/16
File management MTS
e
Copying from internal memory or hard disk to floppy disk (if option selected)
• Press the
FILE key to call the File manager window.
• Select the Internal medium or Hard disk.
• Press the
<Explore> key: the corresponding directory is displayed.
• Find the file(s) or directory (ies) to be copied (refer to "Finding files" on page
8-18). Press the
<Select> key.
• Press the <Transfer> then the
<Copy> key.
• Select the Floppy disk media and the directory, then press the <Open Dir>
key.
• Press the <Confirm copy> key.
The file(s) or directories is (are) copied to the floppy disk.
• the action can be aborted by pressing the <Abort Copy> key.
While the file(s) is (are) being copied:
- a floppy disk icon is displayed in the title bar.
- the name of the file being copied is displayed at the bottom of the screen.
Once the files have been copied, the MTS
e
gives a warning beep.
Printing one or more stored traces
• Select printing parameters in the System setup menu (see page 3-12).
• Press the
FILE key to call the File manager window.
• Select the medium with the files to print: Internal, Hard disk or Floppy disk
• Press the
<Explore> key.
• Find the file(s) to be printed (move the cursor on each file and press the
<Select> key).
• Press the <Transfer> then the
<Print Files> key.
You can then cancel the printing using the <Abort > key.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com