9-10
USER MANUAL 750000992/16
Remote control MTS
e
TERMin Name for the end of the fiber.
DIRection Measurement direction: O → E (origin to extremity) or E → O.
FNUMber Identification number of the fiber from 0 to 999. This number is
used in the file name when automatic file naming is selected.
INCFiber Auto-increment file name function. The fiber number is
automatically incremented at each save operation. This number is
also incremented in the file name (auto mode).
FILEName Filename.
COMMents comments about the file for future reference when the file is
reloaded (3 independent lines of 31 characters).
TPOint Test point (WDM module only).
Next measurement identification commands
This information concerns the acquired trace («next acq. info.» of the file menu).
Format des commandes
Description des fonctions
Identical to Identification commands for a previous measurement.
Remarks in table
(Result window display chosen via the Test Setup menu).
NACQuisition TITLe
OPERator
ORIGin
TERMin
INCFiber
[«string of 16 characters»]
[«string of 16 characters»]
[«string of 16 characters»]
[«string of 16 characters»]
[YES, NO]
CABLe
[«string of 16 characters»]
FNUMber
[0...999]
DIRection
[OE, EO]
FILENAME
[«string of 8 characters»]
COMMents
[string of 93 characters]
TPOint
[
«string of 16 characters»
]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
