Acterna MTSe 5000 Series - MTSe Common Part Commands (cont.); Identification Commands for Previous Measurements

USER MANUAL 750000992/16
9-9
MTS
e
Common part commands
PREView Begins the waveform acquisition in real time without averaging
the results. The unit either can be stopped remotely during the real
time acquisition or will stop automatically after 10 minutes.
SK1, …SK6 Softkey 1 to 6 (from top to bottom of the display).
BEGinacq Begins the waveform acquisition and averages waveform results
during the acquisition period. The unit either accepts a number of
seconds for the acquisition time or can be stopped remotely during
averaging.
HALTacq Stops an acquisition.
Identification commands for a previous measurement
This information concerns the loaded trace («memory info» of the file menu).
Format des commandes
Description des fonctions
TITLe Title for the measurement.
OPERator Operator name.
CABLe Identification name for the cable. The first three characters of this
name are used for the file name when automatic file naming is
selected.
ORIGin Name for the origin of the fiber.
IDENt TITLe
OPERator
ORIGin
TERMin
INCFiber
[«string of 16 characters»]
[«string of 16 characters»]
[«string of 16 characters»]
[«string of 16 characters»]
[YES, NO]
CABLe
[«string of 16 characters»]
FNUMber
[0...999]
DIRection
[OE, EO]
FILEName
[ «string of 8 characters» ]
COMMents
[ string of 93 characters ]
TPOint
[ «string of 16 characters» ]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com