5-2
USER MANUAL 750000992/16
Using an OTDR module MTS
e
All these parameters are configured from the Identifiers menu of the File
Manager window and can be entered before or after the acquisition.
To select the required acquisition, you must call the OTDR TEST SETUP
window measurement result display parameters and fiber parameters, pressing
the <
SET-UP> button. If either the SYSTEM or INSTRUMENT SETUP windows
are already displayed press directly the <Test Setup> key.
OTDR TEST SETUP window
In these windows, the selected parameter is high-lighted or in a different color.
Select this parameter using the ↓ and ↑ directional arrows.
With Both end measurements
Automatic test setup
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
