Hardware Manual
27
Double-click the mouse button on the camera model, the default browser of the PC is automatically
launched and the IP address of the target camera is already filled in the address bar of the browser.
If you work with our cameras regularly, then there is even a better way to discover the cameras
in the network – by using IP Utility. The IP Utility is a light software tool that can not only discover
the cameras, but also list lots of valuable information, such as IP and MAC addresses, serial
numbers, firmware versions, etc, and allows quick configuration of multiple devices at the same
time.
Search and downloand IP Utility for free from http://www.acti.com/DownloadCenter.
With just one click, you can launch the IP Utility and there will be an instant report as follows:
You can quickly notice the camera model in the list. Click on the IP address to automatically launch
the default browser of the PC with the IP address of the target camera filled in the address bar of
the browser already.
To Next Page
Loading...
