This document describes the ACTi ACM-1230 series MegaPixel IP Outdoor IR Bullet Camera, a cutting-edge digital video transmission device designed for surveillance applications. The camera supports multiple power options including DC 12V, Power over Ethernet (PoE), and AC24V, offering flexibility in installation.
Function Description:
The ACTi ACM-1230 series camera is an IP-based outdoor IR bullet camera capable of compressing and transmitting real-time images over a standard TCP/IP network. It leverages a powerful ARM9 SoC to deliver dual streams of MPEG-4 and MJPEG video, both supporting megapixel resolution. This makes it suitable for both conventional and intelligent IP surveillance systems. The camera integrates hardware motion detection, eliminating the need for external sensors, and supports up to three detection areas with adjustable object size and sensitivity for reliable performance.
Important Technical Specifications:
- Image Sensor: Micron Progressive Scan CMOS, 1/3 inch.
- Effective Pixels: 1280 x 1024 (SXGA).
- Minimum Scene Illumination:
- Color mode: Automatically switches to B/W mode under 4 Lux.
- B/W mode: 0 Lux (IR LED ON).
- IR Sensitivity: From 700 nm to 1100 nm.
- IR LED: 24 IR LEDs (850nm).
- IR Working Distance: 20-30 meters (30 IRE).
- Lens: f3.3~12mm / F1.6.
- Viewing Angle (Horizontal): 89.8° ~ 23.9°.
- Synchronization System: Internal.
- Motion Detection: Yes (3 Windows).
- Electronic Shutter:
- 60Hz: 1/5 ~ 1/2000 sec.
- 50Hz: 1/5 ~ 1/2000 sec.
- Flickerless:
- 60Hz: 1/120 sec.
- 50Hz: 1/100 sec.
- BLC (Backlight Compensation): Yes.
- AGC (Automatic Gain Control): Automatic (User defined).
- White Balance: 6 Modes (AUTO, INDOOR1, INDOOR2, OUTDOOR1, OUTDOOR2, HOLD CURRENT, MANUAL) Configurable.
- S/N Ratio: Better than 44 dB.
- Video Compression: MPEG-4 SP, MJPEG selectable.
- Picture Resolution: SXGA (1280x1024), HD 720 (1280x720), VGA (640x480), QVGA (320x240), QQVGA (160x112).
- Image Frame Rate:
- SXGA: 8 fps.
- HD720: 10 fps.
- VGA: 30 fps.
- QVGA: 30 fps.
- QQVGA: 30 fps.
- Audio Compression: 8kHz, Mono, PCM.
- Audio Line Input: Unbalanced, 1.4Vp-p, 1Vrms, terminal block.
- Audio Line Output: Unbalanced, 1.4Vp-p, 1Vrms, terminal block.
- Ethernet: 10/100 Base-T, RJ45 Connector.
- Network Protocols: TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP, 3GPP.
- Operating Temperature: -20℃~50℃ (-4~122°F).
- Power Requirement: DC12V±10%.
- Power Consumption:
- DC12V w/ IR ON: 6W.
- PoE w/ IR ON: 6.24W.
- AC24V w/ IR ON: 10.1VA.
- Dimensions (WxHxD): 77 mm x 75.6 mm x 220mm (3.03" x 2.98" x 8.66").
- Weight: 685g (1.51lb), with sunshield.
Usage Features:
- MPEG-4/MJPEG Dual Streaming: Provides superior image quality with up to 30 frames per second in full D1 resolution and up to 7 frames per second in SXGA (1280x1024).
- Automatic Frame Rate Control: Supports automatic/manual streaming frame rate control, optimizing video delivery for multiple clients with varying network bandwidths.
- Digital Time Code Embedded: Embeds recording time into the MPEG bit stream, allowing users to easily find video at exact times or within specific intervals.
- DDNS Supported: Enables users to set a virtual domain name for the IP device, facilitating remote access via the internet even with dynamic IP addresses.
- Bundle Powerful Surveillance Software: Includes a powerful surveillance program that allows users to utilize an existing PC as a digital video recorder. Features include schedule recording, manual recording, reliable motion detection with instant warnings, and quick search/playback functions.
- Software Development Kit (SDK) Support: Offers a high-level programming interface through a Streaming Library or ActiveX control, reducing development time and effort for integration into user applications.
- Easy Installation: The manual provides clear steps for installation, including connecting cables, mounting the camera onto a bracket, and adjusting focus/zoom.
- Reset Button: Allows users to reset the device to factory default settings by following a simple power cycle and button press sequence.
- Power LED Indicator: Provides visual feedback on the device's power status and boot-up process.
- PoE Capability: For models with built-in PoE, the camera can be directly connected to a PoE switch, simplifying power and data cabling.
Maintenance Features:
- Servicing: Users are advised not to attempt servicing the product themselves to avoid dangerous voltage or other hazards. All servicing should be referred to qualified service personnel.
- Cleaning: Disconnect the video product from the power supply before cleaning.
- Safety Checks: After any service or repair, a service technician should perform safety checks to ensure the video product is in proper operating condition.
- Damage Requiring Service: The manual outlines specific conditions under which the device requires immediate professional servicing, such as damaged power cords, liquid spills, exposure to rain, or abnormal operation.
- Environmental Protection: Emphasizes the importance of installing the device and its power supply in a dry place protected from weather.
- Power Supply Usage: Warns against using power supplies with voltages different from the one included, as this can damage the device or other equipment and void the warranty.
- Housing Integrity: Users are explicitly instructed not to open the housing of the product.
Need help?
General
To Next Page
