Connecting Additional Adapters
If necessary, additional Adapters can be placed at locations around the
home or oce that need an Ethernet Internet connection, but currently
only have a coaxial port.
To connect additional Adapters:
1. Find a coaxial wall port near the desired location and unplug the
coaxial cable connected to the TV or set-top box. If no device is
plugged into this coaxial wall port, skip to step 3.
2. Connect the end of the coaxial cable removed in step 1 to the TV/STB
Out coaxial port on the side of the Adapter.
3. Connect a coaxial cable into the coaxial wall port indicated in step 1.
4. Connect the other end of the coaxial cable installed in step 3 to the
Coax In port on the side of the Adapter.
5. Connect one end of an Ethernet cable into the Ethernet port of the
device to connect to the Internet.
6. Connect the other end of the Ethernet cable into the Ethernet port on
the side of the Adapter.
7. Plug the provided power adapter into the Power port on the side of
the Adapter.
!
To Next Page
Loading...
