Page 9
22. Now go to Network → SQM / QOS to set your upload and download speeds. This is critical to get
right, so don’t skip this step
• For 12Mbps service, start with a value of 10200
• For 6Mbps DSL service, start with a value of 5200
• For 3Mbps service, start with a value of 2600
• Leave the upload speed at 650 for now
23. IF you are a TDS DHCP user, you will need to select the correct interface, please pick eth0.2 from the
drop down, only if you are TDS DHCP. All Windstream is PPPoE and some TDS accounts as well.
24. Click the ‘Save & Apply’ button, wait 30 seconds for it to apply
To Next Page
Loading...
