Need help?Do you have a question about the ActionTec MoCA 2.5 and is the answer not in the manual?
Connect the Extender to your modem/router using an Ethernet cable.
Attach a splitter to the coaxial cable originating from the wall outlet.
Link the splitter to the Extender's coaxial input port.
Power the Extender by connecting its adapter to a power outlet.
Check that the Power and Coax LEDs are green for proper operation.
Connect your device (laptop, etc.) to the Extender via Ethernet.
Connect a splitter to the coax cable from the wall outlet.
Connect a coax cable from the splitter to the Extender's coax-in port.
Connect the Extender's power adapter to a power outlet.
Confirm the Coax LED is green, indicating successful connection.
Confirmation of successful device connection to the internet.
Information on purchasing and connecting more MoCA 2.5 Extenders.
Details on how to get technical support via the Actiontec webpage.
To Next Page
General
