ActionTec MoCA 2.5 - Connect to Modem Router; Connect Ethernet to Modem; Connect Splitter to Coax Outlet; Connect Coax to Extender

TV
ECB7250
Ethernet
Power
Power
Coax
Coax In
ECB6250
MPS
a
a
g
e
e
f
g
f
b
d
d
c
c
MoCA Network
Adapter 2
Laptop or other
access point
Power
Outlet
Splitter
Coax LEDPower LED
Power
Adapter
Ethernet Cable
Coax Outlet
ECB7250
Ethernet
Power
Power
Coax
Coax In
ECB6250
MPS
TV Ethernet Port of
Modem / Router
Power
Outlet
MoCA 2.5
Extender
Power
Adapter
Coax LEDPower LED
Ethernet Cable
Splitter
Coax Outlet
Coaxial wiring behind the wall
b
Step 1: Connect to your Modem/Router
Get one MoCA 2.5 Extender.
Connect one Ethernet Cable from the Extender to
the Modem/Router.
Connect one Splitter to the Coax Cable coming from
the Coax Outlet on the wall.
Connect one Coax Cable from the Splitter to the
Coax In port on the Extender.
Note: If you have a TV or set top box near your modem/router,
connect a coax cable from the splitter to the TV or set top box.
Connect the second Power Adapter (External, 5V DC, 2A
made by APD, Model #WB-10E05FU) to the Extender and to
Power Outlet.
Wait until the Power light on the front of the adapter
is GREEN.
When the Coax LED is GREEN on both adapters, your
adapters are working.
a
b
c
d
e
f
g