ActionTec WCB3000N Basic Instructions

FiOS
Network
Extender
Basic Instructions
Getting Started
Installing FiOS Network Extender
A
B
WCB3000N
©2014 Verizon. All Rights Reserved
©2014 Actiontec Electronics, Inc, Actiontec, and the Actiontec logo are registered trademarks or
trademarks of Actiontec Electronics, Inc. in the US or other countries. All other names are properties
of their respective owners.
This product has a 1-year Limited Warranty
from the date of purchase. Go to
http://www.actiontec.com/products/warranty.php
for more information.
Step
3 Plug one end of the
Power Adapter into the Power
Port on the back of the FiOS
Network Extender. Plug the
other end of the Power
Adapter into a nearby
Electrical Power Outlet.
Step
4 Wait until the Coax
Light on the front of the FiOS
Network Extender is Green.
This may take a couple of
minutes.
Step
5 Connect a Wi-Fi device and surf the Internet wirelessly.
Congratulations!
You have successfully extended your Wi-Fi network.
For additional information go to
www.verizon.com/quickguides
VerizonWCB3000N_QS12_Verizon look WBR QS 10/1/14 2:23 PM Page 2

ActionTec WCB3000N Specifications

General

Brand	ActionTec
Model	WCB3000N
Category	Extender
Language	English