To Next PageTo Next Page
Need help?Do you have a question about the Actron CP7677 and is the answer not in the manual?
Electrical Specifications| DC voltage range | 200mV, 2V, 20V, 200V, 1000V |
|---|---|
| AC voltage range | 2V, 20V, 200V, 750V |
| DC current range | 200mA, 10A |
| Resistance range | 200Ω, 2KΩ, 20KΩ, 200KΩ, 2MΩ, 20MΩ |
Measurement Accuracy| DC voltage accuracy (200mV to 200V) | ± (0.5% rdg + 5 dgts) |
|---|---|
| DC voltage accuracy (1000V) | ± (0.8% rdg + 5 dgts) |
| AC voltage accuracy (2V to 200V) | ± (0.8% rdg + 5 dgts) |
| AC voltage accuracy (750V) | ± (1.0% rdg + 4 dgts) |
| DC current accuracy (200mA) | ± (0.8% rdg + 5 dgts) |
| DC current accuracy (10A) | ± (1.2% rdg + 5 dgts) |
| Resistance accuracy (200Ω to 2MΩ) | ± (0.8% rdg + 5 dgts) |
| Resistance accuracy (20MΩ) | ± (1.5% rdg + 5 dgts) |
| Dwell accuracy | ± (3.0% rdg + 5 dgts) |
| RPM accuracy | ± (3.0% rdg + 5 dgts) |
Additional Features| Dwell range | 4CYL, 6CYL, 8CYL |
|---|---|
| RPM range | 4CYL, 6CYL, 8CYL |
| Audible continuity threshold | less than 30-50 Ohms |
Defines multimeter functions, symbols, and special display indications.
Explains how to select the correct range for accurate measurements and avoid overranging.
Details the procedure for measuring DC voltages in various automotive circuits.
Outlines steps for measuring component resistance, like coils and sensors.
Covers tests for battery condition and charging system performance.
Details procedures for testing ignition coils, wires, and sensors.
Provides guidance for testing various engine sensors like O2, temperature, and position.
Lists the range and accuracy for DC voltage measurements.
Details the range and accuracy for resistance measurements.
