Do you have a question about the Actron Sunpro CP7605 and is the answer not in the manual?
Type | Digital Multimeter |
---|---|
Display | LCD |
Display Digits | 3.5 |
Measurement Functions | DC Voltage, AC Voltage, DC Current, Resistance, Continuity, Diode, Battery |
DC Current Range | 200µA to 10A |
Continuity Test | Yes |
Diode Test | Yes |
Battery Test | 1.5V, 9V |
Battery Type | 9V |
Auto Power Off | Yes |
Low Battery Indicator | Yes |
Safety Rating | CAT III 600V |
AC Voltage Range | 200V to 600V |
Resistance Range | 200Ω to 2MΩ |
Introduces the Dwell/Tach/Voltmeter and its main functions for electronic systems.
Essential safety precautions and guidelines to follow during instrument use.
Information on performing tune-up procedures using the instrument.
Details regarding available repair parts for the instrument.
Covers fire safety, clothing, jewelry, and ventilation during vehicle work.
Addresses hot surfaces, battery handling, and brake settings for safety.
Lists publishers and sources for obtaining vehicle service information.
Critical advice for instrument usage and vehicle servicing procedures.
Details the instrument's meter scales for Volts, RPM, and Dwell.
Explains how to connect test leads for voltage and dwell/tach measurements.
Lists and describes optional accessories like GM and Ford adaptors.
Guides on using the voltmeter for electrical system checks.
Procedure to check charging voltage and battery condition.
Tests for battery health and cranking motor performance.
Guidance on performing various voltage measurements in vehicle systems.
Using the voltmeter to test ignition system components.
Steps for testing and adjusting dwell angle for breaker point systems.
Specific methods for adjusting dwell on conventional breaker point distributors.
Procedure to check dwell angle variation with engine speed.
Using the dwell function for fuel system tests, like GM C-3.
Tests requiring RPM monitoring for carburetor adjustments.
Checking fuel injection system adjustments using RPM.
General engine tests that may require RPM monitoring.