Acuity Brands LITHONIA LIGHTING QUANTUM LQM

To Next Page

1.READ AND FOLLOW ALL

SAFETY INSTRUCTIONS

2. Before wiring to power supply, turn off

electricity at fuse or circuit breaker.

3. Disconnect A.C. power before servicing.

4. All servicing should be performed by

qualified personnel.

5. Consult your local building code for ap-

proved wiring and installation.

6. Do not use outdoors.

7. Do not mount near gas or electric heater.

8. Fixture must be grounded to avoid potential

electric shock.

9. Equipment should be mounted in location

and at heights where it will not readily be

subjected to tampering by unauthorized

personnel.

10. The use of accessory equipment not

recommended by the manufacturer may

cause an unsafe condition.

11. Do not use this equipment for other than

intended use.

SAVE THESE

INSTRUCTIONS

DIRECCIONES

DE SEGURIDAD

1. LEA Y SIGA TODA LAS INSTRUCCIONES DE

SEGURIDAD

2. Antes de instalar los cables al suministro de energia

electrica corte la corriente al fusible o caja de circuito.

3. Corte la corriente CA antes de mantener.

4. Todo mantenimiento debe ser hecho por personal

capacitado.

5. Consulte el codigo de construccion local para cables e

instalacion electrica aprobado.

6. No utilize en el exterior.

7. No lo instale cerca a calentadores electricos o de gas.

8. Tome precauciones cuando este manteniendo las baterias.

Corte la corriente CA antes de mantener las baterias.

9. Este equipo se debe instalar en un sitio y a una altura donde

no este expuesto a personal sin autorizacion.

10. El uso de este accesorio que no sea recomendado por el

fabricante puede causar una condicion peligrosa.

11. No use este equipo en una forma diferente a lo que esta

intencionado.

GUARDE ESTAS

INSTRUCCIONES

LQM L.E.D. Exit Sign

INSTALLATION INSTRUCTIONS

INSTRUCCIONES DE INSTALACION

US Patent No. 5,611,163, 5,739,639 and 5,526,251

US Patent No. 5,954,423, 5,988,825, 6,152,581, 6,502,044,

D495,751, and D383,501

Canada Patent No. 2,204,218. Other Patents Pending.

IMPORTANT

SAFEGUARDS

Need help?

Do you have a question about the Acuity Brands LITHONIA LIGHTING QUANTUM LQM and is the answer not in the manual?

Summary

Important Safeguards

General Safety Instructions

Read and follow all safety instructions before wiring, servicing, and installation.

Environmental and Usage Restrictions

Do not use outdoors or mount near heaters; ensure proper grounding.

Mounting and Accessory Guidelines

Mount securely to prevent tampering; use manufacturer-recommended accessories.

Top;Side Mount Installation

Mounting Bracket and Wiring

Connect jumper leads, mount bracket to J-Box, and rotate for alignment.

Canopy and Housing Assembly

Place canopy over bracket, dress leads through housing, and snap housing onto canopy.

Securing and Final Assembly

Snap cam-lock pin into retaining hooks and attach the faceplate.

General Information and Maintenance

Component Handling and Wiring

Remove chevrons, install PCB cover, connect leads to circuit board.

Assembly and Cover Removal

Attach housing to back cover, remove canopy and back cover by releasing latches.

Inspection, Battery, and Warranty

Inspection and Battery Charge

Test systems quarterly; charge battery 24 hours initially, 168 hours fully.

Battery Replacement and Caution

Replace battery with manufacturer's recommended part; avoid prolonged AC absence.

Wiring Diagram and Warranty

Provides wiring diagram for AC input and battery; details five-year warranty.