Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your Acura
dealer) is required to remove the
filter.
Install a new oil filter according to
instructions that come with it.
Open the hood and remove the
engine oil fill cap. Remove the oil
drain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container.
Run the engine until it reaches
normal operating temperature,
then shut it off.
4.
3.2.
1.
Engine Oil
Maintenance
210
OOIILL FFIILLTTEERR
WWAASSHHEERR
OOIILL DDRRAAIINN BBOOLLTT
To Next Page
Loading...
Need help?
General
