Determinewhichofthefivebulbs
is burned out: stop/taillight, turn
signal light, side marker light,
back-up light, or taillight.
Remove the socket by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Install the light assembly cover.
Make sure it locks in place.
Testthelightstomakesurethe
new bulb is working.
Open the hatch. Remove the light
assembly cover by pulling on the
tabontheoutsideedge.
2.
3.
1.
4.
5.
6.
7.
Lights
Maintenance
Replacing Rear Bulbs
249
CCOOVVEERR
To Next Page
Loading...
Need help?
General
