Remove the bulb by pulling it
straight out of the bulb holder.
Push the new bulb into the bulb
holder.
Reinstall the lens by inserting the
outside edge first, then pushing on
theinsideedge.
Remove the lens of the burned out
bulb by carefully prying on the
edge between the lenses with a
fingernail file or a small flat-tipped
screwdriver.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Testthelightstomakesurethe
new bulb is working.
Slide the right side of the light
assembly into the hole. Push on
theleftsidetolatchtheassembly
into place.
1. 2.
3.
4.
5.
3.
4.
Lights
Maintenance
Replacing the Spotlight Bulbs
251
BBUULLBB
To Next Page
Loading...
Need help?
General
