CONTINUED
Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
You could scratch the wheel if you
putitfacedown.
Find the jacking point nearest the
wheel you are removing. Place the
jack under the jacking point. Turn
the end bracket clockwise until
the top of the jack contacts the
jacking point. Make sure the
jacking point tab is resting in the
jack notch.
Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully,itmaybehotfrom
driving.
9. 10.
11.
12.
Changing a Flat Tire
Taking Care of the Unexpected
265
EEXXTTEENNSSIIOONN
WWHHEEEELL WWRREENNCCHH
JJAACCKKIINNGG PPOOIINNTT
To Next Page
Loading...
Need help?
General
