−
＋
Connect the second jumper cable
to the negative ( ) terminal on
the booster battery. Connect the
other end to the boss on the intake
manifold as shown. Do not
connect this jumper cable to any
other part of the engine.
Connect one jumper cable to the
JUMP START terminal in the fuse
box. Connect the other end to the
positive ( ) terminal on the
booster battery.
Open the rear window and engine
cover. Locate the engine
compartment fuse box on the
driver’s side of the compartment.
Removethefuseboxcover.
3. 4. 5.
Taking Care of the Unexpected
Jump Starting
252
FUSE BOX COVER
JUMP START
TERMINAL
To Next Page
Loading...
