Make sure the engine and radiator
are cool.
The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.
Pour the coolant slowly and
carefully so you do not spill any.
Clean up any spill immediately; it
could damage components in the
engine compartment.
Put the radiator cap back on, and
tighten it fully.
Relieve any pressure in the cooling
system by turning the radiator cap
counterclockwise, without
pressing down.
Remove the radiator cap cover.
Remove the radiator cap by
pushing down and turning
counterclockwise.
3.
4.
1.
2.
5.
CONTINUED
Engine Coolant
Maintenance
391
RADIATOR CAP COVER
RADIATOR CAP
０６／０８／０２ １０：５２：４９ ３１ＳＴＸ６００ ０３９６
To Next Page
Loading...
