Acura MDX 2007 - User Manual

Service Bulletin
© 2008 American Honda Motor Co., Inc. – All Rights Reserved BTB 33416-39817 (0807) 1 of 6
CLIENT INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and
training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume this
bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized
Acura automobile dealer.
July 4, 2008
06-038
Applies To: 2007–09 MDX – ALL
2007–09 MDX: TQI of the DVD Navigation System
(Supersedes 06-038, dated April 24, 2008, to update the information marked by the black bar)
BACKGROUND
This bulletin provides information for the TQI of the
DVD navigation system, including testing. These topics
are covered:
• Navigation System Controls
• Voice Control System
• Navigation System Setup at the TQI
• Map Coverage Areas
• Hawaii System Setup
• AcuraLink Real-Time Traffic Information
• Ordering a DVD
For more detailed information on system operation,
refer to the navigation system manual.
WARRANTY CLAIM INFORMATION
None. These procedures are considered part of the
normal TQI.
NAVIGATION SYSTEM CONTROLS
Screen – All selections and instructions are displayed
on the screen. This is not a touch-screen display.
Information cannot be entered into the system by
touching the images or icons with your finger. To
communicate with the system, use the voice control
system or the interface dial. If the vehicle has a
rearview camera, the rear view is shown on the
navigation system screen whenever you shift to R. Use
a soft cloth and a mild cleaner intended for eyeglasses
or computer screens to clean the screen.
Upper Display
– Shows the radio information, the
climate control information, and the time.
MENU button
– Press this button to change the display
from the current screen to the Enter destination by
screen. When en route to a destination, press this
button to change to the Change route by screen.
MAP/GUIDE button
– Press this button to display a
map of your current position for driving.
When en route,
press this button to switch between the map and the
guidance or direction list screen.
INFO button
– Press this button to display the menu for
selecting Message, Voice Command Help, Trip
Computer, Map Legend, Calendar, Calculator, Key
to Zagat ratings, Roadside Assistance, and Cellular
Phonebook.
NOTE: To access the Cellular Phonebook from the
above menu, a cell phone must be paired to the HFL
system. If the client does not pair a cell phone to the
HFL system, Cellular Phonebook appears as a gray
box within the menu and is not accessible.
AUDIO button
– Press this button to display the audio
screen.
DISPLAY MODE button
– Switches the display
between Day mode, Night mode, and OFF.
CANCEL button
– Press this button to return to the
previous screen.
SETUP
– Displays the setup screens to change and
update information in the system.
DIAL/ENTER button
– The interface dial moves left,
right, up and down. It also rotates.
• Move the dial up and down to scroll through a
displayed list, a page at a time.
• Rotate the dial to move highlighting from one item to
another in a list.
• Push in on the DIAL/ENTER button to select an item
in a list once it is highlighted.
MAP/
GUIDE
BUTTON
SCREEN
UPPER DISPLA
Y
INTERFACE DIAL
MENU
BUTTON
INFO
BUTTON
MAP/
GUIDE
BUTTON
AUDIO
BUTTON
DISPLAY
MODE
BUTTON
SETUP
BUTTON
CANCEL
BUTTON

Summary

Acura Navigation System Background and Overview

Voice Control System Introduction

Initial Navigation System Setup

Initial setup and configuration steps for the navigation system.

AcuraLink Real-Time Traffic Feature

Navigation System Controls and Interface

Voice Control System Operation

NAVI TALK and NAVI BACK Button Usage

Using specific buttons to activate and control voice commands.

Voice Command Help and Recognition Tips

Accessing help and guidelines for improving voice recognition accuracy.

Navigation System TQI Initialization

Initial System Initialization Procedure

Procedure for initializing the navigation system upon vehicle delivery.

XM Radio and Remote Setup Verification

Diagnosis Screen and Anti-Theft Code Entry

Accessing diagnosis and entering the anti-theft code.

GPS Satellite Acquisition Process

The process of the system acquiring its location from GPS satellites.

Initialization and Map Matching Steps

Steps for initialization completion and map matching after driving.

System Interaction and Functionality Tests

Traffic Information System Testing

Hawaii System Setup Procedure

Selecting Hawaii Map Coverage

Steps to change the navigation system's map coverage to Hawaii.

Post-Setup Map Matching for Hawaii

AcuraLink Real-Time Traffic Information

Traffic Data Display and Interpretation

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Controls
5. Voice Control System
6. Navigation System Setup (TQI)
7. Map Coverage Areas
8. Hawaii System Setup
9. Ordering a DVD
10. Maintenance Features

This document describes the DVD Navigation System for the 2007-09 Acura MDX, focusing on its controls, setup, and features.

Function Description

The DVD Navigation System provides turn-by-turn guidance, map display, and various information services to the driver. It is not a touch-screen system; interaction occurs primarily through voice commands or an interface dial. The system integrates with the vehicle's audio and climate control systems, and for certain models, offers AcuraLink Real-Time Traffic Information.

Important Technical Specifications

• Display: Non-touch screen, shows selections and instructions.
• Input Methods: Voice control system (NAVI TALK and NAVI BACK buttons) and interface dial (DIAL/ENTER button).
• Audio Output: Guidance instructions through front speakers; front and rear speakers muted during voice command input.
• Map Database: Covers 48 contiguous United States, parts of southern Canada, and Hawaii.
• Map Data Storage: White-label DVD (not compatible with black-label DVDs or other map software).
• GPS Initialization: Average 10 minutes, up to 45 minutes. Requires an open area away from obstructions.
• XM Satellite Radio Integration: Requires dealer demo account setup for full functionality; subscription required after 3 months for 2007-09 MDX models.
• Anti-Theft Code: 4-digit security code required for navigation system operation, found on the Navigation Anti-Theft Code card or via the iN (Interactive Network).
• Traffic Data (AcuraLink Real-Time Traffic Information): Available in metropolitan areas, displayed as color-coded flow bands (red for heavy, orange for moderate, green for free-flowing) and diamond-shaped incident icons (accidents, construction, weather).

Usage Features

Controls:

• Screen: Displays all information. Clean with a soft cloth and mild cleaner for eyeglasses or computer screens.
• Upper Display: Shows radio, climate control, and time information.
• MENU Button: Changes display to "Enter destination by" screen (or "Change route by" when en route).
• MAP/GUIDE Button: Displays current position map; switches between map and guidance/direction list when en route.
• INFO Button: Accesses menu for Message, Voice Command Help, Trip Computer, Map Legend, Calendar, Calculator, Key to Zagat ratings, Roadside Assistance, and Cellular Phonebook.
  • Note: Cellular Phonebook requires a paired cell phone to the HFL system.
• AUDIO Button: Displays audio screen.
• DISPLAY MODE Button: Switches between Day, Night, and OFF display modes.
• CANCEL Button: Returns to the previous screen.
• SETUP Button: Accesses setup screens for system information changes.
• DIAL/ENTER Button: Moves highlighting (left, right, up, down) and rotates to scroll lists or change map scale. Pushing it selects a highlighted item.
  • Map Scale: Rotate clockwise to reduce scale (more detail, less area); counterclockwise to increase scale (less detail, more area).
• NAVI TALK Button: Activates voice control. Press, release, wait for beep, then speak command.
• NAVI BACK Button: Functions like CANCEL button. Returns to previous display, then prompts for a command after a beep.

Voice Control System:

• Primary Interaction: Voice commands are the main method for system control.
• Improving Recognition:
  • Adjust vents to prevent airflow toward the ceiling microphone.
  • Close windows and moonroof.
  • Set fan speed to low (1 or 2).
  • Wait for the beep after pressing NAVI TALK before speaking.
  • Speak clearly, naturally, without pausing.
  • Ensure the correct screen is displayed for the command.
  • Speak louder if not recognized.
  • Avoid other voices or speaking with obstructions in mouth/heavy accents.
• Voice Command Help: Accessible via INFO button, includes a tutorial.

Navigation System Setup (TQI):

1. Normal TQI: Complete vehicle TQI, including audio system. Navigation voice functions after entering the 5-digit audio anti-theft code.
2. XM Satellite Radio: Verify dealer demo account is active by tuning to stations 000, 001, 007, 009, 047, 122, 174, and 247.
3. MID Display: Verify "Welcome DRIVER 1" or "Welcome DRIVER 2" appears on MID when ignition is ON (II). If only "Welcome" appears, link remotes (refer to service manual).
4. In Line Diagnosis Screen: If displayed, press and hold MENU, MAP/GUIDE, and CANCEL until "Select diagnosis menu" appears. Then press and hold MAP/GUIDE for 15 seconds. Select "Complete," then "Return" twice.
5. Security Code Entry: Start engine, move vehicle outside, away from obstructions. Enter 4-digit security code (from card or iN). If lost, contact American Honda Warranty. If 0000 works, replace navigation control unit.
6. Initialization: Follow on-screen instructions. System acquires GPS location.
   • Troubleshooting: If initialization fails after 10 minutes, do not immediately follow on-screen instructions. Restart after 30 minutes. If persistent, check for GPS interference (metallic window tint, electrical items near antenna), antenna cable connection, or refer to service manual.
7. Disclaimer Screen: Select OK after initialization.
8. Map Matching: Drive at least half a mile from dealership, then park. Set map scale to 1/20. Verify smooth VP (vehicle position) icon movement, correct direction, and road name display.
9. Voice Guidance Test: Press NAVI TALK, say "Find the nearest Acura dealer." Select dealership, then OK to calculate route. Follow voice guidance back to dealership; should work even with audio off.
10. Audio System Interaction: With map screen displayed, press NAVI TALK, say "XM channel 125." Upper display should show "XM channel 125" and "Weather Channel."
11. Climate Control Interaction: Turn on climate control (AUTO). Press NAVI TALK, say "Temperature 68 degrees." Upper display should show "68 degrees."
12. Clock Adjustment: Verify correct time. Adjust "Auto Daylight" to ON in Setup screen. If near time zone boundary, set "Auto Time Zone by GPS" to OFF.
13. AcuraLink Real-Time Traffic (if available): Select traffic map scales (1/2, 1, 2, or 5 miles). Scroll to downtown area; freeways should show traffic flow data (red, orange, green lines) and incident icons. Scroll over icons for details.

Map Coverage Areas:

• Verified Roads: Driven by database vendor, contain speed, turn restrictions, one-way info. Darker colored on screen (daytime).
• Unverified Roads: Found in rural areas, shown for reference only. Light brown on screen (daytime). Guidance depends on "Unverified routing" setting (OFF: dotted blue vector line, manual road selection; ON: blue/pink route line, pop-up cautionary boxes). Factory default is OFF.
• Detailed Coverage: Fully mapped cities/metropolitan areas with named roads, service roads, POIs, ferry connections, walkways, traffic areas, ramps, roundabouts, etc.
• Non-Detailed Coverage: Incomplete mapping, only major federal/state/county roads mapped. Asterisk (*) next to city name indicates missing streets, incorrect location, or unavailable address info.

Hawaii System Setup:

1. Press and hold MENU, MAP/GUIDE, and CANCEL to access main diagnostic menu.
2. Select "Coverage area," then "Hawaii coverage." System may reboot.
3. Start vehicle, move to open area for GPS signal acquisition.
4. After initialization, drive on a road until road name appears at bottom of map screen for map matching.
   • Note: If relocating from Hawaii to mainland, change "Coverage area" to US. Changing coverage area resets previous destinations, address book, and system settings to factory defaults. XM Satellite Radio/AcuraLink not available in Hawaii.

Ordering a DVD:

• Order online at www.acuranavi.com or call Acura Disc Fulfillment Center (888-549-3798).
• Requires credit card.
• Only white-label DVDs for this model are compatible.
• Updated DVDs usually available in fall, contain enhanced maps/POIs, software bug fixes, additional features.
• Map matching required after DVD removal/replacement.
• Order DVDs as needed; no free updates.
• Damaged discs not covered by warranty unless damaged by navigation unit.

Maintenance Features

• Screen Cleaning: Use a soft cloth and a mild cleaner intended for eyeglasses or computer screens.
• DVD Updates: Updated map DVDs are released annually, typically in the fall, and can be purchased to ensure the most current map data and software enhancements.
• Anti-Theft Code: Essential for system re-initialization after power loss. Keep the code card safe. If lost, it can be retrieved via the iN system or by contacting American Honda Warranty.
• GPS Signal: For optimal performance, ensure the vehicle is in an open area away from trees, power lines, and tall buildings during initialization. Remove loose articles, cell phones, or electrical accessories near the GPS antenna to prevent interference.

Acura MDX 2007 Specifications