Check each of the large fuses in
the primary under-hood fuse box
by looking through the top at the
wire inside. Removing these fuses
requires a Phillips-head
screwdriver.
If something electrical in your
vehicle stops working, the first thing
youshouldcheckforisablownfuse.
Determine from the chart on pages
, , and , or the diagram
on the fuse box lid, which fuse or
fuses control that device. Check
those fuses first, but check all the
fuses before deciding that a blown
fuse is the cause. Replace any blown
fuses, and check if the device works.
Remove the cover from the fuse
box.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
3.1.
2.
440 441 442
Checking and Replacing Fuses
Fuses
Taking Care of the Unexpected
437
BLOWN
BLOWN
FUSE
０６／０８／０２ １０：５８：５８ ３１ＳＴＸ６００ ０４４２
To Next Page
Loading...
