Navigation System 135
Frequently Asked Questions
Daylight savings time occurred, but the navigation system did
not change time even though Setup shows “Auto Daylight” is
“ON.”
Go to the Clock Adjustment screen in Setup and simply turn off the auto
daylight savings time feature, select Time Adjustment, and adjust your
clock
using the Interface Dial by one hour. For more information, see
Clock Adjustment on page 99.
The navigation system automatic daylight time feature is not
switching the navigation system clock on the correct dates.
Why is this?
The navigation system clock switched by one hour for no
apparent reason. What can cause this?
1) You may be near a time zone boundary…(Covered in the other “clock”
FAQs)
My battery was disconnected, or went dead, and the
navigation system is asking for a code. Where do I find this
code?
There should have been a card in the glove box with the anti-theft code for
I speak a language other than English. When will other
languages be available for the navigation system?
This is being considered as a future enhancement.
Problem Solution
according to the schedule in effect at the time your vehicle was produced.
For more information, see Clock Adjustment on page 99.
2) The navigation system does not, or incorrectly switches between
and serial number. If you cannot find it, your dealer can help you out.
standard and Daylight savings time. Set the “Auto Daylight” to “OFF”
on the Clock Adjustment screen in Setup. Manually adjust the clock
the navigation/audio system. This card contains the 4-digit security code
by one hour as needed. See page 99 for more information.
The navigation system is designed to switch to daylight savings time
To Next Page
Loading...
