Before mounting the spare tire,
wipeanydirtoffthemounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully;itmaybehotfrom
driving.
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
Lower the vehicle to the ground,
and remove the jack.
10. 11. 12.
Changing a Flat Tire
434
BRAKE HUB
０６／０８／１２ １９：１６：０３ ３１ＳＪＡ６２０ ０４３９
To Next Page
Loading...
