90 Navigation System
System Set-up
1. Select PIN Number. The display
changes to:
2. Enter your new four-digit PIN. If you
do not wish to use a PIN, select DO
NOT USE PIN.
NOTE:
The factory default is no PIN.
3. When you have entered your PIN, the
display changes to the Please re-
enter new PIN screen. Enter the
same number to validate the number
you have selected.
4. If you have entered the same number
both times, the display returns to the
Edit personal information screen. If
not, “INCORRECT PIN” appears.
Enter your PIN again.
NOTE:
• If you start the vehicle and the MID
displays only “Welcome,” this
function is unavailable.
• If you wish to remove your PIN,
return to the same screen and, after
entering your PIN correctly, select
DO NOT USE PIN.
• PINs are optional. If you choose to
use a PIN, make sure you remember
it. If you forget your PIN, your dealer
will have to reset it for you.
Previous Destinations
Allows you to delete some or all of your
previous destinations.
1. Select this option, and the display
changes to:
NOTE:
Normally, moving the Interface Dial
left exits most screens. However, for this
screen, moving the dial left deletes all of
your previous destinations.
To Next Page
Loading...
Need help?
General
