When language selection is
successfully completed, the display
changes to the screen shown above
for several seconds, then goes back
to ‘‘CUSTOMIZE MENU.’’
If you fail to select a language
properly, you will see the above
display for several seconds, then the
display goes back to ‘‘CUSTOMIZE
MENU.’’ Repeat the setup.
To exit ‘‘LANGUAGE SELECTION,’’
press the INFO button repeatedly
until you see ‘‘EXIT,’’ then press the
SEL/RESET button. The display
goes back to ‘‘CUSTOMIZE MENU.’’
All messages on the multi-
information display will be shown in
the language you selected.
CONTINUED
Multi-Information Display
Instruments and Controls
95
０７／０５／１７ １６：５９：１７ ３１ＳＥＡ６４０ ０１００
To Next Page
Loading...
