−−
−
−This function
samples the first track of all the
discs in the CD changer in the order
they are stored. To activate it, touch
the DISC SCAN icon or press and
hold the SCAN button. You will see
SCANontheleftsideoftheDISC
icon on the display as a reminder.
D-SCAN also appears on the upper
display. The system will then play
the first track of the first CD for
approximately 10 seconds. If you do
nothing, the system will then play
the next CD’s first track. When it
plays a disc that you want to
continue listening to, touch the DISC
SCAN icon or press the SCAN
button again.
Touch the
TRACK REPEAT icon to
continuously replay a track. You will
see REPEAT on the left side of the
TRACKicononthedisplayasa
reminder. RPT also appears on the
upper display. Press the icon again to
turn it off.
Touch the DISC
REPEAT icon to continuously replay
the current CD. You will see
REPEATontheleftsideoftheDISC
icon. D-RPT also appears on the
upper display. Press the icon again to
turn it off.
The TRACK
RANDOM function plays the tracks
within a CD in random order, rather
than in the order they are recorded
on the CD. To activate it, press the
TRACK RANDOM icon. You will see
RANDOM on the left side of the
TRACKicononthedisplayasa
reminder. The system will then
select and play tracks randomly.
This continues until you deactivate
TRACK RANDOM by touching the
TRACK RANDOM icon again.
Playing Discs
DISC SCAN TRACK REPEAT
DISC REPEAT
TRACK RANDOM
Features
191
０７／０５／１７ １７：１４：４４ ３１ＳＥＡ６４０ ０１９６
To Next Page
Loading...
Need help?
General
