After the message on the multi-
information display is canceled by
pressing the INFO button, the
engine oil life display will appear in
the lower segment. You will see a
‘‘SERVICE’’ message along with the
maintenance item code(s), and the
total negative mileage after the oil
life becomes 0 % is displayed.
Immediately have the service
performed, and make sure to reset
the display as previously described.
This message is displayed when you
drive over 10 miles (for U.S. models)
or 10 km (for Canadian models)
after seeing the 0 % message.
Also, the total negative mileage
keeps blinking on the display.
This particular message is displayed
when you drive over 10 miles (for
U.S. models) or 10 km (for Canadian
models) after seeing the 0 %
message.
To cancel the message, press the
INFO button on the steering wheel.
To see the message again, wait for
an interval of more than 5 seconds,
and then press the INFO button.
To cancel the engine oil life display,
press the SEL/RESET button to
return to the previous display.
Maintenance Minder
286
U.S.
CANADA
０７／０５／１７ １７：３１：５１ ３１ＳＥＡ６４０ ０２９１
To Next Page
Loading...
Need help?
General
