After properly securing the child
seat (see page ), route the
tether strap over the seat-back.
Follow steps 2 and 3 from the
previous column.
After properly securing the child
seat (see page ), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
1.
2.
3.
1.
2.
48 48
Using the Center AnchorUsing an Outer Anchor
Installing a Child Seat
50
TETHER STRAP HOOK
TETHER STRAP HOOK
ANCHOR
ANCHOR
０７／０５／１７ １６：５０：５６ ３１ＳＥＡ６４０ ００５５
To Next Page
Loading...
