To exit ‘‘DEFAULT ALL,’’ press the
INFO button until you see ‘‘EXIT,’’
then press the SEL/RESET button.
When ‘‘DEFAULT ALL’’ is
completed successfully, you will see
the above display for several seconds,
and the display will return to
‘‘CUSTOMIZE ENTRY.’’
If ‘‘DEFAULT ALL’’ is not completed
successfully, you will see the above
display for several seconds, then the
display goes back to ‘‘CUSTOMIZE
ENTRY.’’ Repeat the procedure to
select ‘‘DEFAULT ALL.’’
Multi-Information Display
Instruments and Controls
91
０７／０５／１７ １６：５８：３５ ３１ＳＥＡ６４０ ００９６
To Next Page
Loading...
