There are five custom settings in the
Meter Setup:
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY
TRIP A & AVG. FUEL RESET
with REFUEL
ELAP. TIME RESET
CONDITION
PRIMARY DISP SELECTION
While ‘‘METER SETUP’’ is displayed,
press the SEL/RESET button on the
steering wheel. Then, press the
INFO button repeatedly. Each time
you press the INFO button, the
display changes as shown.
To customize a setting, press the
INFO button repeatedly until you see
the setting you want to customize,
and press the SEL/RESET button.
Then follow the procedures
described on the following pages.
CONTINUED
Meter Setup
Multi-Information Display
Instruments and Controls
93
: Press the INFO Button.
０７／０５／１７ １６：５９：００ ３１ＳＥＡ６４０ ００９８
To Next Page
Loading...
