Select the quality you want to adjust
by pressing the ▼ or ▲ button.
Adjust the setting by pressing the
or button. When you are finished
with your adjustment, cursor back to
the top of the setup menu, or press
the RETURN button to exit.
If you want to set the display to the
default setting, select ‘‘Reset’’ by
pressing the ▲ or ▼ button, and,
then pressing the ENT button.
The display changes as shown above.
Select ‘‘Yes,’’ and press the ENT
button. You will see the message
‘‘Default display settings applied’’ on
the display for 5 seconds.
CONTINUED
Rear Entertainment System
251
Featur es
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
To Next Page
Loading...
Need help?
General
