The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature to your preference.
When you set the temperature to its
lower or its upper limit, the system
runs at full cooling or heating only. It
does not regulate the interior
temperature.
When you change the fan speed, the
fan is taken out of AUTO mode and
starts to run at the selected speed.
The automatic climate control
system adjusts the fan speed and
airflow levels to maintain the interior
temperature you select.
In AUTO mode, the vehicle’s interior
temperature is independently
regulated for the driver and
passenger. If the driver’s side of the
vehicle is getting too much sun, the
system will adjust to a lower
temperature.
Press the AUTO button.
Set the desired temperature with
the temperature control bars.
You will see AUTO in the display
iftheclimatemodeisselected.
Select . The system
automatically switches to fresh air
mode and turns on the A/C.
Select .
Set the fan and temperature
controls to maximum level.
To clear the windshield faster, you
can close the dashboard corner vents
by rotating the wheel next to it. This
sends more warm air to the
windshield defroster vents. Once the
windshield is clear, select the fresh
air mode to avoid fogging the
windows.
For your safety, make sure you have
a clear view through all the windows
before driving.
1.
2.
1.
2.
3.
Climate Control System
Automatic Climate ControlTo Remove Exterior Frost or
Ice From the Windows
Features
211
０９／０４／０２ １９：０４：５２ ３１ＳＪＡ６５０ ０２１６
To Next Page
Loading...
